Products Lineup
Digital DBS Front-end Units
Features
- (1) Equipped with a high-performance direct conversion IC. Reliability is improved by reducing power consumption and component counts.
- (2) Wide-band reception design also covering CS broadcast band. [Input frequency: 950 to 2 150 MHz]
- (3) User support tools can be provided. [Sample/evaluation boards and software are available.]
Standard Specifications <IQ output type>
Destination |
Global (ISDB-S/DVB-S2/ABS-S) |
|
Input type |
1-input/1-loop through output |
1-input |
Model No. |
BS2S7VZ7A03 |
BS2S7VZ6D02 |
Input frequency (MHz) |
950 to 2 150 |
|
Input signal level (dBm) |
–65 to –25 |
|
Base band frequency bandwidth (MHz) |
5 to 40, 2 MHz step (BB LPF) |
|
RF input local leak (dBm) |
–68 and below |
|
Output type |
I/Q |
|
Noise figure (dB) |
6 (TYP.) |
|
Phase noise (dBc/Hz) |
–88 (TYP.) at 10 kHz offset |
|
Supply voltage (V DC) |
3.3 |
|
LNB power supply |
DC 25 V, 400 mA (MAX.) |
|
Input impedance (Ω) |
75 |
|
Outline dimensions (mm) |
30.4 (W) × 29.4 (D) × 12.9 (H) |
25.2 (W) × 17.4 (D) × 8.7 (H) |
Note: Low-profile type is also available. |
 |
 |
BS2S7VZ7A03 |
BS2S7VZ6D02 |
<Notice >
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
