Check the size of the placed original on
the display of the [Original] key.
If the original size is set to [Auto], the automatically
detected size (standard size) is displayed. If the original size
is specified manually, the specified original size is displayed.
When you place the original in the automatic document feeder,
the original icon appears above the automatic document feeder.
Standard sizes
Standard sizes are sizes that the machine can automatically detect.
For standard sizes that can be detected, refer to
DETECTABLE ORIGINAL SIZES.
- Even when [Original] is set to
[Auto], some original sizes may be detected as other one that
is near the standard size.
In this
case, manually set the original size.
SELECTING THE ORIENTATION AND SIZE OF THE ORIGINAL
- When placing a non-standard size original
on the document glass, you can make it easier for the size to be
detected by placing a blank sheet of 8-1/2" x 11" (A4), 5-1/2" x
8-1/2" (B5), or other standard size of paper on top of the original.
Orientation of placed original
Place the original as shown below.
If you place the original in an incorrect orientation, it
may result in punching at an unexpected position or stapling.
On "Preview Screen", view the image orientation or preview
image.
PREVIEW SCREEN
| Document glass |
|
| Document feeder tray |
|
Set the orientation of the image to ensure that
the orientation of the placed original is correctly recognized.
For information on the orientation of the original, see
"
Specifying the orientation of the original".
Automatic copy image rotation (Rotation Copy)
If the orientation is different between the original
and paper, the original image will be automatically rotated 90 degrees to
match the paper.
BEFORE USING THE MACHINE
OPERATION OF THE MACHINE
COPIER
PRINTER
FACSIMILE
SCANNER/INTERNET FAX
DOCUMENT FILING
CONVENIENT USE OF THE MACHINE
SETTING MODE
TROUBLESHOOTING
APPENDIX
