This function divides the
originals into sets and feeds each set through the automatic document
feeder one set at a time when copying a very large number of originals.
This saves you the trouble of sorting the copies.
When scanning originals that are separated into sets, scan
the set that has the first page first.
The individual copy settings can be configured for each set
of originals to be scanned separately.
Up to 100 sets of originals can be scanned for one job.
- You must select Job Build mode before
scanning the original.
- If you needed to change all original settings,
change before scanning the original.
- If the Quick File Folder of document filing
mode is full, copying in job build mode will be impeded. Delete
unnecessary files from the Quick File Folder.
The Job Build mode cannot be combined with other
functions.
To
use Job Build in Easy mode
In "Settings (administrator)", select [System Settings] →
[Common Settings] → [Operation Settings] → [Easy Mode Settings] → [Easy Copy].
Copying in job build mode
Tap the [Others] key, and tap the [Job Build] key.
A checkmark appears on the icon.
After the settings are completed, tap the [OK]
key.
To
cancel the job build setting
Tap the [Job Build] key to uncheck it.
Change settings as needed.
Place the original in the document feeder tray of the
automatic document feeder, and tap the [Start] key to scan the
first original.
Insert the originals all the way into the document feeder
tray. Originals can be stacked up to the indicator line.
AUTOMATIC DOCUMENT FEEDER
Place the next set of originals and tap the [Start]
key.
Repeat this step until all originals have been scanned.
Repeat until all pages have been scanned and check the
preview image in the preview screen.
To
cancel all settings:
Tap the [CA] key.
Tap the [Read-End] key to start copying.
Changing the copy settings for each
set of originals
As necessary, change copy settings for each set of originals.
Perform the steps below before scanning the next set of originals
in step 4 of "Copying in job build mode".
A [Separator Page] setting cannot be changed for the
second and later sets.
Tap the [Change Setting] key.
Change copy settings.
Place the next set of originals and tap the [Start]
key.
Repeat this step until all originals have been scanned.
This feature copies originals in different sizes at the same
time even when A5 (5-1/2" x 8-1/2") size originals are mixed with
A4 (8-1/2" x 11") size originals.
When scanning the originals, the machine automatically detects
the size of each original and uses paper appropriate for that size.
When mixed size original is combined with auto ratio selection,
the ratio is adjusted individually for each original according to
the selected paper size, enabling printing on a uniform paper size.
When
mixed size original is combined with auto ratio selection
(Auto ratio selection and A4 (8-1/2" x 11") are selected)
- Mixed Size Original cannot be selected
in easy mode.
- Mixed Size Original must be specified before
scanning the original.
Tap the [Others] key, and tap the [Mixed Size Original] key.
A checkmark appears on the icon.
After the settings are completed, tap the [Back] key.
To
cancel the mixed size original setting
Tap the [Mixed Size Original] key to clear the checkmark.
Place the original face up on the document feeder tray
with the corners aligned together in far left corner.
Place the original as shown on the Mixed Size Original screen.
Tap the [Start] key to start copying.
(BP-B547WD
only)
When you wish to scan thin originals using the automatic document
feeder, you can use this function, which helps prevent thin originals
from misfeeding.
- Slow Scan Mode cannot be selected
in easy mode.
- Slow Scan Mode must be specified before
scanning the original.
The "2-Sided→2-Sided" and "2-Sided→1-Sided" modes of automatic
2-sided copying cannot be used.
Tap the [Others] key, and tap the [Slow Scan Mode] key.
A checkmark appears on the icon.
After the settings are completed, tap the [Back]
key.
To
cancel slow scan mode:
Tap the [Slow Scan Mode] key to clear the checkmark.
Place the original in the document feeder tray of the
automatic document feeder.
AUTOMATIC DOCUMENT FEEDERIf the originals are inserted with too much force,
they may crumple and misfeed.
Tap the [Start] key to start copying.
On the BP-B547WD, when the document rolls in the original
exit tray on the automatic document feeder, fix the paper fixing
arm at the centre to the top.
This function adjusts the resolution when
scanning the original, enabling the high-quality output or speed-priority
output according to the application.
- Resolution cannot be selected in
easy mode.
- Resolution must be specified before scanning
the original.
- The resolution setting is applied when
making a full-size copy.
Tap the [Others] key, and tap the [Scan Resolution] key.
Select the resolution.
The resolution can be set to both the document feeder
and document glass.
After the settings are completed, tap [OK] and [Back]
keys in sequence.
Place the original.
Place the original in the document feeder tray of the
automatic document feeder, or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASSTap the [Start] key to start copying.
.png)
BEFORE USING THE MACHINE
OPERATION OF THE MACHINE
COPIER
PRINTER
FACSIMILE
SCANNER/INTERNET FAX
DOCUMENT FILING
CONVENIENT USE OF THE MACHINE
SETTING MODE
TROUBLESHOOTING
APPENDIX
