Specify a time at which a transmission or
broadcast transmission will automatically take place. Transmission
begins automatically at the specified time.
This function is helpful when you wish to perform reserved,
broadcast or other transmissions during your absence or at night
or other times when telephone rates are low.
For example, When originals are loaded and set to transmit
at 20:00, the scanned data will not be transmitted immediately,
instead, it will automatically start transmitting at 20:00.
Place the original.
When in fax mode, then after completing this procedure,
proceed to Step 3.
Place the original in the document feeder tray of the
automatic document feeder, or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASSSpecify the destination.
When in fax mode, enter the destination number.
ENTERING A DESTINATION NUMBER USING THE NUMERIC KEYS
RETRIEVING A DESTINATION FROM AN ADDRESS BOOK
USING A SEARCH NUMBER TO RETRIEVE A DESTINATION
USING A TRANSMISSION LOG TO RESENDTap the [Others] key, and tap the [Timer] key.
Tap [On] key.
Specify the time.
Specify the time (hour and minute) in 24-hour format.
After the settings are completed, tap
and [Back] keys in sequence.
- Tap the areas displaying the hour
and minute respectively, and enter the values using the numeric
keys.
- It is convenient to use
to finely adjust the time.
- The setting will show the current time.
If the time is not correct, press the [CA] key to cancel
the operation. Correct the time in setting mode and then perform
the timer transmission procedure.
To
cancel the Timer Transmission settings:
Tap the [Off] key.
To
set the date and time of the machine:
In the operation panel or Web page, select [System Settings]
→ [Common Settings] → [Device Control] → [Clock Adjust].
Tap the [Start] key to start scanning of the original.
- If you inserted
the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning
has ended, and the machine stands by for transmission.
- When you place the original
on the document glass, scan each page one at a time.
When scanning finishes, place the next
original and tap the [Start] key.
Repeat until all pages have been scanned
and then tap the [Read-End] key.
A beep will sound to indicate that scanning
has ended, and the machine stands by for transmission.
The original is scanned into memory. The original
cannot be scanned at a specified time.
BEFORE USING THE MACHINE
OPERATION OF THE MACHINE
COPIER
PRINTER
FACSIMILE
SCANNER
CONVENIENT USE OF THE MACHINE
SETTING MODE
TROUBLESHOOTING
APPENDIX
