COPY COLOUR MODES

Select the colour mode from Auto, Full Colour, B/W, 2 Colour, and Single Colour.

Auto	The machine automatically detects whether each original is colour or black & white and switches the mode appropriately (full colour for a colour original or black & white for a black & white original).
Full Colour	The original is copied in full colour.
B/W	The original is copied in black and white.
2 Colour	The original is copied in two colours by changing a specific colour used in the original to another colour. If red is set to a specific colour, reddish parts in an original are extracted, and changed to the specified colour to make a copy.
Single Colour*	The original is copied in any one colour regardless of the colours used in the original.

If any colour mode is selected, copying takes place in black and white when you tap the [B/W Start] key.

Tap the [Colour Mode] key.

Select the colour mode.

After the settings are completed, tap [OK] key. Check that the specified colour mode is selected.

When auto mode is used, there may be some originals for which switching between colour and black & white does not take place correctly. If so, tap the [Colour Start] or [B/W Start] key to manually switch between colour and black & white.
When [B/W Start] is selected, the [Colour Start] key cannot be tapped.

COPYING IN TWO COLOURS

The original is copied in two colours by changing a specific colour to another colour.

Tap the [Colour Mode] key.

Tap the [2 Colour] key.

Tap the [Change] key.

Tap the key of the colour to be extracted to specify the extract colour.

[Except Black]:

[Reddish Colour]:

Specify the colour to change the extracted colour to.

After the settings are completed, tap the [OK] key on the [2 Colour] screen, and check that the changed setting is displayed at the side of [2 Colour] key on the colour mode screen.
After you have checked it, tap [OK]. Check that the specified colour mode is selected.

COPY COLOUR MODES

COPYING IN TWO COLOURS

COPYING IN SINGLE COLOUR

CONTENTS MENU