INTERRUPT COPY
This function suspends a job in progress, and preferentially
prints the original specified with interrupt copy.
When you need to make an urgent copy and the machine is busy
with a long copy run or other job, use interrupt copy.
- The [Interrupt]
key does not appear while an original is being scanned.
- Depending on the settings
of the job in progress, the [Interrupt] key may not appear.
- Interrupt copy cannot
be used in combination with the following functions:
Job Build,
Tandem Copy, Book Copy, Card Shot, Multi-Page Enlargement, Original
Count, Proof Copy, Preview Setting, and Book Divide.
- If you use the document
glass for interrupt copy, you cannot select the booklet, covers/inserts
function, or N-Up setting.
If any
of these functions are necessary, use the automatic document feeder.
Tap the [Interrupt] key.
The interrupt mode screen appears.
If
user authentication is specified:
Tap the [Interrupt] key to display the user authentication
screen. Enter the login name and password to perform user authentication.
Place the original.
Place the original in the document feeder tray of the
automatic document feeder, or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASSConfigure copy settings.
To cancel interrupt copy, tap the [Cancel]
key.
Tap the [Start] key to start interrupt copying.
When the interrupt copy job is completed, the interrupted
job will resume.
The interrupt copy function does not display the
preview of the scanned original.
