SHARP

TRAY 2 - 4 (when 500-sheet paper feed tray and stand/2x500 sheet paper drawer are installed)

A maximum of 500 sheets (350 sheets for heavy paper of 106 g/m2 to 176 g/m2 (28 lbs. bond to 65 lbs. cover) paper, 250 sheets for heavy paper of 177 g/m2 to 220 g/m2 (65 lbs. cover to 80 lbs. cover) paper) of paper from size A5R to A3 (5-1/2" x 8-1/2"R to 11" x 17") can be loaded into trays 2 to 4.

If you loaded paper of a different type or size from the paper previously loaded, be sure to check the settings in "Settings (administrator)". Incorrect setting affects automatic paper selection action. It may cause print failure, printing on paper of a wrong size or type or paper misfeeds.

Caution

Do not place heavy objects on the tray or press down on the tray.
To check the type and size of paper:
In the Web page, select [Status] → [Machine Identification] → [Paper Input Tray Status]→ [Paper Tray Settings].
To set the type and size of paper:
[Tray Settings] in the home scree

Pull out the paper tray.

Gently pull the tray out until it stops.
If you want to re-load the same sheet of paper, proceed to Step 3.
To load paper of a different size, proceed to the next step.

Adjust guide plates A and B to match the longitudinal and transversal dimensions of the paper to be loaded.

The guide plates A and B are slidable. Squeeze the separator plate lever and slide to the desired paper size..

Fan the paper.

Fan the paper well before loading it. If the paper is not fanned, multiple sheets may feed at once and cause a misfeed.

Insert the paper into the tray.

Load the paper with the print side facing up. The stack must not be higher than the indicator line (Maximum of 500 sheets).
  • If a paper misfeed occurs, turn the paper over and/or around, and reload.
  • If the paper is curled, fix the curl before loading the paper.
  • Adjust the divider plate so that there is no gap between the paper and divider plate.
  • Do not add paper.
  • Do not load the paper as shown below.

Gently push the paper tray into the machine.

Gently push the paper tray into the machine.
Forcefully inserting the tray may cause the paper to be skewed and misfeed.

CONTENTS MENU

Version 01a / bp22c25_usr_01a_en

↑Top of page