SCAN TO USB MEMORY DEVICE

When the IC card reader is connected to the machine, printing and scan saving using a USB memory device cannot be used at the same time.

Connect the USB memory device to the machine.

Use FAT32, NTFS or exFAT format for USB memory device.

Tap the [Scan to USB Memory] key.

Place the original.

Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS

Tap the [Colour Start] key or [B/W Start] key.

After scanning all originals, tap the [Read-End] key.

When you scan the original using the automatic document feeder, this screen does not appear.

Check the [Sending data has been completed.] message, and remove the USB memory device from the machine.