Operation Settings
All items except for the Custom Link are available
in the system settings from the operation panel..
Message Time Setting
The duration of time that messages appear in the touch
panel (the time until a message is automatically cleared) can be set
to any number of seconds from 1 to 12.
- Factory default settings:
- 6 seconds
Language Setting
The language that appears in the touch panel can be
changed to any language.
- Factory default settings:
- Varies
depending on country and region
Default Display Settings
Set the screen that appears after auto clear and login.
- Factory default settings:
- Home Screen
Display IP Address on the Machine Information
Screen
This setting specifies whether or not to display the
IP address of the machine on the "Machine Information" screen.
- Factory default settings:
- Enable
Icon is Displayed when Network Cable is not Connected.
Show an icon when a LAN cable is not connected.
- Factory default settings:
- Enable
Display Confirmation Dialog when job is canceled.
Show a confirmation dialog box when a job is cancelled.
- Factory default settings:
- Disable
Restrict Total Count display
When this setting is enabled, the total count is hidden
when checking the total count from the home screen.
- Factory default settings:
- Disable
Alignment Order of 10-Key
Set whether the numeric keys are arranged in ascending
order with "1" in the upper left corner, or "1" in the lower left corner.
- Factory default settings:
- Ascending
order from upper left
Auto Clear Setting
Cancel Auto Clear Timer
Disables the auto clear mode.
- Factory default settings:
- Disable
Auto Clear Setting
The time until Auto Clear activates can be set to any
number of seconds from 10 to 240 in increments of 10 seconds.
If the machine is not used for the duration of time set here,
the auto clear function will clear any settings that have been selected
and return the default display screen.
- Factory default settings:
- 60 seconds
Disable Display Timeout
When auto clear time has elapsed in scanner mode, the
operation screen returns to the basic screen
- Factory default settings:
- Disable
Time for Accepting Key Entry
This setting determines how long a key in the touch
panel must be tapped until the key input is registered. The time
can be set from 0 to 2 seconds in increments of 0.5 seconds.
By lengthening the time setting, key input can be prevented
when a key is tapped accidentally. Keep in mind, however, that when
a longer setting is selected more care is required when tapping
keys to ensure that key input is registered.
- Factory default settings:
- 0.0 seconds
Disable Auto Key Repeat
This is used to disable key repeat.
- Factory default settings:
- Disable
Time for Accepting Key Entry of Long
Touch
Select a time when a long key touch is detected.
- Factory default settings:
- 0.5 seconds
Remote Operation Settings
Configure settings required for remote operation of
the machine from a PC connected to the same network.
Remote Software Operation
- Allow Operational Authority:
This is used when remote software is used to
operate the machine remotely.
- View Password Entry Screen:
When operating the machine by remote control
using the remote software, the password entry screen will appear
on both the computer and the machine, or on only the computer.
- Factory default settings:
- Allow
Operational Authority: Prohibited, View Password Entry Screen: Display
in Both PC and Machine
Operation from Specified PC
- Allow Operational Authority:
This is used to allow remote operation of the
machine using the specified PC.
- Hostname or IP Address of
PC:
Enter the host name or IP address of the PC
to be connected to the machine.
- View Password Entry Screen:
When operating the machine by remote control
using the remote software, the password entry screen will appear
on both the computer and the machine, or on only the computer.
- Factory default settings:
- Allow
Operational Authority: Prohibited, View Password Entry Screen: Display
in Both PC and Machine
Operation by User who Has Password
- Allow Operational Authority:
This is used to allow a user who has a password
to operate the machine remotely. For information on the password, consult
your service technician.
- View Password Entry Screen:
When operating the machine by remote control
using the remote software, the password entry screen will appear
on both the computer and the machine, or on only the computer.
- Factory default settings:
- Allow Operational Authority:
Prohibited, View Password Entry Screen:Display in Both PC and Machine
Data List
Set whether to print the data list with 1-sided print
or 2-sided print.
- Factory default settings:
- 1-sided
print
Keyboard Select
Change the key layout and display according to the set
language.
- Factory default settings:
- Varies
depending on country and region
Custom Links
You can display registered web addresses in the display
field of the setting menu.
By clicking on a custom link, you can jump to the web site
of the registered address.
This setting can only be set on the Web page.
