SHARP

Device Control

Various devices mounted on the machine can be set.

All items except for the Clock Adjust, Daylight Saving Time Setting, Paper Type for Auto Paper Selection and Disabling of Tray Settings are available in the system settings of the Web page.
For Device Control on the operation panel, see the following "THE SETTING MODE LIST OF THE OPERATION PANEL".

Condition Settings

Original Size Detector Setting

One of the 8 groups of standard original sizes shown below can be selected for detection by the original size detection function.

Selections Detectable original sizes
Document Glass Document feeder tray (automatic document feeder)

AB-1

A3, A4, A4R, A5, B4, B5, B5R

A3, A4, A4R, A5, B4, B5, B5R, 11"x17", 8-1/2"x14", 8-1/2"x11"

AB-2

A3, A4, A4R, A5, B5, B5R

A3, A4, A4R, A5, B4, B5, B5R, 11"x17", 8-1/2"x11", 216mmx330mm (8-1/2"x13")

AB-3

A4, A4R, A5, B4, 8K, 16K, 16KR

A3, A4, A4R, A5, B4, 11"x17", 8-1/2"x11", 216mmx330mm (8-1/2"x13"), 8K, 16K, 16KR

AB-4

A3, A4, A4R, A5, B5, B5R

A3, A4, A4R, A5, B4, B5, B5R, 11"x17", 8-1/2"x11", 216mmx340mm (8-1/2"x13-2/5")

AB-5

A3, A4, A4R, A5, B5, B5R

A3, A4, A4R, A5, B4, B5, B5R, 11"x17", 8-1/2"x11", 216mmx343mm (8-1/2"x13-1/2")

Inch-1

11" x 17", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"

11"x17", 8-1/2"x14", 8-1/2"x11", 8-1/2"x11"R, 5-1/2"x8-1/2", A3, A4

Inch-2

11" x 17", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"

11"x17", 216mm x 330mm (8-1/2"x13"), 8-1/2"x11", 8-1/2"x11"R, 5-1/2"x8-1/2", A3, A4

Inch-3

11"x17", 8-1/2"x11", 8-1/2"x11"R, 5-1/2"x8-1/2"

11"x17", 216mmx340mm (8-1/2"x13-2/5), 8-1/2"x11", 8-1/2"x11"R, 5-1/2"x8-1/2", A3, A4
Factory default settings:
AB-1
Original size when the automatic document feeder is open
When a thick original is set on the document glass and the automatic document feeder is not completely closed and the original is scanned, the original size cannot be automatically detected. Set the original size manually.

Cancel Detection at Document Glass

Original size detection on the document glass can be disabled. When this is done, all originals placed on the document glass are treated as special size originals.

Factory default settings:
Disable

Display Warning Message when Original is not Detected

A message is displayed when the original size cannot be detected when the original is set. You can prevent output with an unintended original size.

Factory default settings:
Disable

Paper Type for Auto Paper Selection

The paper types* that the Auto Paper Selection function will select can be specified. Select one of the following settings:

  • Plain 1
  • Plain 2
  • Recycled
    • The Auto Paper Selection function will not select any paper types other than the paper types specified with this setting.

    * The paper type set for each paper tray by selecting [System Settings] in the Web page → [Paper Tray Settings].

    Factory default settings:
    Plain1, Plain2
    This item is located under "Device Control" in the system settings from the operation panel.

    Plain Paper Compatibility Settings

    Set the basis weight of plain paper that is normally used.
    Select from Plain1 and Plain2.
    The weight of Plain Paper 1 is 60 to 89 g/m2 (16 to 24 lbs bond). The weight of Plain Paper 2 is 90 to 105 g/m 2 (24 to 28 lbs bond).

    Factory default settings:
    Plain1

    Disabling of Tray Settings

    This setting is used to prohibit tray settings (except for the bypass tray).

    Factory default settings:
    Disable

    This item is located under "Device Control" in the system settings from the operation panel.

    Status Indicator Setting

    Data Indicator Setting

    Sets the operation of the information lamp. For details on the settings, see " INFORMATION INDICATOR".

    Factory default settings:
    Pattern 1

    Error Light Setting

    Sets the operation of the error lamp. For each setting, see the following " INFORMATION INDICATOR".

    Factory default settings:
    Light & Blink

    Machine Identification Settings

    Enter a name or code to identify the machine.

    Clock Adjust

    Use this to set the date and time in the machine's built-in clock.

    Item Description

    Specify Time Zone

    If your region is ahead of GMT (Greenwich Mean Time), select [+]. If your region is behind GMT, select [-]. Next, specify the time difference between your region and GMT in hours and minutes. (Example: If your region is Japan, + 9 hours 00 minutes.)

    Date&Time Settings

    Select and set the year, month, day, hour, and minute.
    This item is located under "Device Control" in the system settings from the operation panel.

    Daylight Saving Time Setting

    Enable daylight saving time.

    Item Description

    Daylight Saving Time Setting

    Select whether or not the Daylight Saving Time Setting is enabled. If disabled, the following settings will not be possible.

    Factory default settings:
    Disabled

    Select Setting Type

    Specify whether the starting and ending day of daylight saving time are to be set using the day of the week or the date.

    Start Time

    Set the starting time of daylight saving time. If you selected "Day of the Week" in "Select Setting Type", set the starting week of daylight saving time and then the starting day. If you selected "Date" in "Select Setting Type", set the starting date. Set the hour and minute and the UTC (Coordinated Universal Time) setting.

    Completing Time

    Set the ending time of daylight saving time in the same way as you set the starting time.

    Adjustment Time

    Set the time to be adjusted when daylight saving time begins.
    This item is located under "Device Control" in the system settings of from the operation panel.

    Enable/Disable Settings

    The following settings enables or disables certain functions.
    The prohibited setting items in the settings of each function such as Printer Settings and the items in this prohibited setting are linked.

    Printer Settings

    Prohibit Notice Page Printing
    Disables to print a notice page.

    Factory default settings:
    Enable
    Prohibit Test Page Printing
    Disables to print the test page.
    When this setting is enabled, [Status] → [Data List] → [List for User] → [Printer Test Page] in the Web page cannot be used to print test pages.
    Factory default settings:
    Disable
    Exclude Bypass-Tray from Auto Paper Select
    When [Auto] is selected for paper type selection, the bypass tray is excluded from the trays that can be selected. It is recommended when special paper is set up in the bypass tray frequently.
    Factory default settings:
    Disable
    Disable Blank Page Print
    Disables to print a blank page.
    Factory default settings:
    Disable

    Image Send Settings

    Disable Scan Function
    Disable Storing to USB Memory
    Set this when you want to prohibit data saving to a USB memory.

    Factory default settings:
    Disable
    Settings to Disable Transmission
    These settings are used to disable the following transmission operations.
    Disable Selection from Address Book
    Disables the selection of destinations from the address book.
    Configure the setting for each of the following items:
  • E-mail
  • Network Folder/FTP/Desktop
    • Select All: Select all items.
    Clear Checked: Deselect all items.
    Factory default settings:
    All Invalid
    Disable Direct Entry
    Disables the direct entry of destination address and others.
    Configure the setting for each of the following items:
  • E-mail
    • Select All: Selects all items.
    Clear Checked: Clears all selections.
    Factory default settings:
    All Invalid
    Disabling of Find My Address
    This prohibits Find My Address.
    Factory default settings:
    Disable

    Device Control

    Disabling of Tray Settings
    This setting is used to prohibit tray settings (except for the bypass tray).

    Factory default settings:
    Disable

    Product Key

    PS3 Expansion Kit
    E-mail Alert and Status
    Enter the product key and application number for the above functions.

    Depending on the activation status of the extended function of the machine, the items displayed will change. For the product key to be entered, contact your dealer.

    CONTENTS MENU

    Version 01a / bp22c25_usr_01a_en

    ↑Top of page