SHARP

Language

EASILY CONNECT WITH AN NFC-COMPATIBLE MOBILE DEVICE (EASY CONNECT)

You can easily connect the machine to a smartphone or other NFC compatible mobile device.
Touch the NFC touch pointarea in the lower right corner of the operation panel.
By installing the dedicated application in the mobile device in advance, the application will start automatically after the device connects to the machine, allowing you to print immediately.
You can also connect by displaying a QR code on the machine's touch panel and scanning the code with a mobile device that has a dedicated application installed.

  • Make sure that the mobile device’s Wi-Fi function and NFC function are turned on in advance.

CONNECTING BY NFC

You can easily connect a mobile device to the machine by holding it to the NFC touch point area.
In addition, by installing the dedicated application on your mobile device, the application will automatically start when the device connects to the machine, allowing you to send data and print to the machine right away.
Configure settings on the machine in advance to enable use of an NFC and wireless LAN.

  • This function may not support depending on the Android version of your device.

    • Hold your mobile device to the NFC touch point area

    If the machine is in the auto power shutoff state, holding your mobile device to the NFC touch point area will wake the machine. However, if [Sleep Mode] is set to [Energy Saving Priority], you must wake the machine manually.

    Connecting to the Machine from a Mobile Device

    The machine and mobile device automatically start the connection.
    If the dedicated application is not installed, your mobile device will automatically connect to the Google PlayTM site and download the dedicated application.
    If the dedicated application is installed on your mobile device, it will start.
    You can print and scan from the application.
    If the connection is not successful, try the following:
    • Move the mobile device slowly over the NFC touch point area.
    • If a case is attached to the mobile device, remove the case.

    CONNECTING BY QR CODE

    You can connect by displaying the QR code on the machine's touch panel and then having your mobile device (with the dedicated application already installed) read the QR code.
    The machine sends the information required for connection to the mobile device, and the information is saved. No settings are required on the mobile device, and setup is quickly accomplished.
    Configure settings on the machine in advance to enable connection by QR code.

    This function can be used on an Android device and on an iOS device.

    Tap the [Easy Connect (QR code)] key in the home screen.

    The QR code appears on the touch panel.
    In advance, enable QR codes in [Easy Connection Setting] in Settings (administrator), and enable display of the [Easy Connect Setup] key in [Home Screen Settings].

    Start the dedicated application on your mobile device

    Read the QR code on the touch panel with your mobile device

    The QR code is the machine's connection information. This information is saved on your mobile device. You can also set an external access point as the connection destination.

    CONTENTS MENU

    Language

    Version 03a / bp70c65_usr_03a_us

    ↑Top of page